Water damaged iPhone 6 white Apple problem- Get solution here!

Here is the water damaged iPhone 6, the problem is the iPhone 6 stuck on white Apple logo, the boot current measured is too large, you can get solution here!

Before we are going to fix iPhone 6, we need to preparing some iPhone fix tools.

- iPhone opening tools

- DC Power supply

- Microscope

- Tweezers

- Digital multimeter

- QUICK 861DW

- Other tools

Disassemble the iPhone 6 by phone opening tools, carefully take out the iPhone motherboard.

Measure the iPhone motherboard by DC power supply, the boot current is large, the failure is iPhone 6 white Apple and large boot current.

Put it under the Trinocular Integrated Microscope to observe, no specific faults found.

Measure the resistance value of the USB by digital multimeter, the resistance value turns down, which is abnormal.

Use Titanium Alloy Tweezers to remove the USB IC, the boot current measured is normal, so we replace the USB IC directly.

After replacement, measure the iPhone again, the data is normal.

Assemble the iPhone 6 and test it, now the iPhone can be turned on smoothly.

After get into IOS, test all functions on iPhone, all works well.